eGO Cycle electric scooter throttle. This is the replacement 3 wire throttle used with the SC Controller. Not compatible with the Sevcon Controller.
Installation Help: Guide the pins thru the grommet in the chassis and push through using the wire. Do not pull the wire through the grommet by holding the pins. Be patient and work the cable in, it will go through. Match up the connector provided to the mating connector that comes from the main harness and push the pins into the connector matching the same color wires to the same color wires. Make sure the pins click into place and don't pull out. If they do pull out then rotate them 180 degrees and try again.
Old part number: 2EC062A0006
